Clone Copying - Muratec MFX-3550 User Manual

Copying
1. Press Copy on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Copy Feature and press OK.
4. Press the up/down arrow to highlight Layout and press OK.
5. Press the up/down arrow to highlight Poster Copy and press OK.
6. Press Stop/Clear to return to ready mode.
Your original is divided into 9 portions. Each portion is scanned and printed one by one in the
following order:

Clone copying

The machine prints multiple original images on a single page. The number of images is automatically
determined by the original image and the paper size.
This copy feature is available only when you place originals on the scanner glass.
1. Press Copy on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Copy Feature and press OK.
4. Press the up/down arrow to highlight Layout and press OK.
5. Press the up/down arrow to highlight Clone Copy and press OK.
6. Press Stop/Clear to return to ready mode.
You cannot adjust the copy size using the Reduce/Enlarge for the Clone Copy feature.
COPYING ON BOTH SIDES OF ORIGINALS
You can set the machine to print copies on both sides of paper.
1. Press Copy on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Copy Setup and press OK.
4. Press the up/down arrow to highlight Duplex Print and press OK.
5. Press the up/down arrow until the binding option you want highlights.
Off: Prints in Normal mode.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com manuals search engine
108
Page 5 of 7
8/4/2009