For Network Connected Machine - Muratec MFX-3550 User Manual

Scanning

For network connected machine

Make sure the printer driver is installed on your computer using the software CD, since the printer
driver includes the scan program. (See
1. Make sure that your machine and the computer are connected to a network and Scan
Manager is installed on the computer.
2. Load originals face up into the document feeder, or place a single original face down on the
scanner glass.
3. Press Scan/Email on the control panel.
4. Press the up/down arrow to highlight Scan To PC and press OK.
5. Press the up/down arrow to highlight Network PC and press OK.
6. Select your registered computer ID, and enter the Password if necessary.
7. Press the up/down arrow until the application program you want highlights and press OK.
Default setting is My Documents.
8. Press the up/down arrow until the setting you want highlights and press OK.
9. Scanning begins.
SCANNING ORIGINALS AND SENDING VIA SMB/FTP (SCAN
TO SERVER)
You can scan an image and send it to a total of five destinations via the SMB or FTP.
Setting up an FTP server
To use an FTP server, you need to set up parameters to access the FTP servers using SyncThru™
Web Service.
1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings > FTP Setup > Server List.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
You can use Twain driver to scan quickly in Scan Manager program.
You can also scan by pressing Window's Start > Control Panel > Samsung Scan
Manager > Quick Scan.
If you see Not Available message, check the port connection.
ID is the same ID as the registered Computer ID for Scan Manager.
Password is the 4 digit number registered Password for Scan Manager.
To add or delete the folder where the scanned file is saved, add or delete the application
program in Scan Manager > Properties > Set Scan Button.
Resolution: Sets the image resolution.
Scan Color: Sets the color mode.
Scan Format: Sets the file format in which the image is to be saved.
Scan Size: Sets the image size.
Scan Format appears only when you selected the Scan destination to My Documents.
If you want to scan from the default setting, press Start.
Scanned image is saved in computer's My Documents > My Pictures folder.
You can use Twain driver to scan quickly in Scan Manager program.
You can also scan by pressing Window's Start > Control Panel > Scan
Manager > Quick Scan.
manuals search engine
Installing wired network connected machine's
115
Page 5 of 16
driver.)
8/4/2009