Printing Received Faxes On Both Sides Of The Paper; Receiving Faxes In Memory; Adjusting The Document Settings - Muratec MFX-3550 User Manual

Faxing
8. Press Stop/Clear to return to ready mode.
When a fax is received in secure receiving mode, your machine stores it in memory and shows
Secure Receive to let you know that there is a fax received.
Printing received faxes
1. Access the Secure Receive menu by following steps 1 through 4 in "Activating secure
2. Press the up/down arrow to highlight Print and press OK.
3. Enter the four-digit password and press OK.
Deactivating secure receiving mode
1. Access the Secure Receive menu by following steps 1 through 4 in "Activating secure
2. Press the up/down arrow to highlight Off and press OK.
3. Enter the four-digit password and press OK.
4. Press Stop/Clear to return to ready mode.

Printing received faxes on both sides of the paper

Set this duplex feature to save paper. When the machine prints the received fax data, it prints them
on both sides of the paper.
1. Press Fax on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Fax Setup and press OK.
4. Press the up/down arrow to highlight Receiving and press OK.
5. Press the up/down arrow to highlight Duplex Print and press OK.
6. Press the up/down arrow until the binding option you want highlights.
7. Press OK to save your selection.
8. Press Stop/Clear to return to ready mode.

Receiving faxes in memory

Since your machine is a multi-tasking device, it can receive faxes while you are making copies or
printing. If you receive a fax while you are copying or printing, your machine stores incoming faxes
in its memory. Then, as soon as you finish copying or printing, the machine automatically prints the
fax.

ADJUSTING THE DOCUMENT SETTINGS

Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
receiving mode."
The machine prints all of the faxes stored in memory.
receiving mode."
The mode is deactivated and the machine prints all faxes stored in memory.
Off: Prints in Normal mode.
Long Edge: Prints pages to be read like a book.
Short Edge: Prints pages to be read by flipping like a note pad.
manuals search engine
134
Page 8 of 14
8/4/2009