Muratec MFX-3550 User Manual page 186

Troubleshooting
Replace with
new one
Fuser Door is
open.Close it
Retry Redial?
Replace New
Toner
Replace with
New Toner
Scanner locked
Self
Diagnostics...
Please wait
Send Error
There is a
problem in DNS
Send Error
There is a
problem in POP3
Send Error
There is a
problem in SMTP
Send Error
There is a
problem in SMTP
authentication
Send Error
There is a
problem on the
NIC Card
Toner is empty
Toner is empty.
Replace with
new one
Toner is worn
Toner is worn.
Replace with
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/t... www.Manualslib.com
The fuser door is not securely latched.
The machine iswaiting for a
specifiedtime interval to rediala
previously busystation.
The toner cartridge has reached the end
of its lifespan.
The scanner module is locked.
The engine in your printer is checking
some problems detected.
There is a problem in DNS.
There is a problem in POP3.
There is a problem in SMTP.
There is a problem in SMTP
authentication.
There is a problem on network interface
card.
A toner cartridge has reached its
estimatedcartridge life. Theprinter stops
printing.
Estimated cartridge life means the
expected or estimated toner
cartridge life, which indicates the
average capacity of print-outs and is
designed pursuant to ISO/IEC
19752. (See
The number of pages may be
affected by operating environment,
printing interval, media type, and
media size. Some amount of toner
may remain in the cartridge even
when Toner is empty appears and
the printer stops printing.
A toner cartridge has almost reached its
estimated cartridge life.
manuals search engine
General specifications.)
185
Page 14 of 27
Close the fuser door until it locks
into place.
You can press OK toimmediately
redial, orStop/Clear to cancel the
redial operation.
Replace the toner cartridge with a
Samsung-genuine toner cartridge.
(See Replacing the toner
cartridge.)
Unlock the CCD lock. (See
view. Front view) Or turn off the
machine and on again. If the
problem persists, call for service.
Please wait a few minutes.
Configure the DNS setting.
Configure the POP3 setting.
Change to the available server.
Configure the authentication
setting.
Turn the power switch off and on.
If the problem persists, call for
service.
Replace the toner cartridge. (See
Replacing the toner cartridge.)
You can choose among Stop or
Continue as shown on the control
panel. If you select Stop, the
Front
8/4/2009