Muratec MFX-3550 User Manual page 56

Network setup
1. Insert the supplied software CD into your CD-ROM drive. The software CD should automatically run
and an installation window appear.
2. Click Next.
If necessary, select a language from the drop-down list.
3. Select Typical installation for a network printer and then click Next.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
Make sure that the network setup for your machine is completed. All applications should be
closed on your computer before beginning installation.
If the installation window does not appear, click Start and then Run. Type X:\Setup.exe,
replacing "X" with the letter which represents your drive. Click OK.
If you use Windows Vista, click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing "X" with the letter which represents your drive and click OK.
If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run
program field, and click Continue in the User Account Control windows.
If your printer is not connected to the network, the following window will appear. Select a
setup option you want, click Next.
Then the Set IP Address window appears. Do as follows:
manuals search engine
55
Page 20 of 24
8/4/2009