Change Percentage Of Your Document; Fitting Your Document To A Selected Paper Size - Muratec MFX-3550 User Manual

Printing
Do not print on both sides of the special media, such as labels, envelopes, or thick paper to print
on both sides of paper. It may cause a paper jam or damage the machine.
1. To change the print settings from your software application, access Printing Preferences. (See
Opening printing
2. Click the Basic tab.
3. From the Double-sided Printing section, select the binding option you want.
4. Click the Paper tab, select the Size, Source, and Type.
5. Click OK or Print until you exit the Print window.

Change percentage of your document

You can change the size of a document to appear larger or smaller on the printed page by typing in
a percentage you want.
1. To change the print settings from your software application, access Printing Preferences. (See
Opening printing
2. Click the Paper tab.
3. Enter the scaling rate in the Percentage input box.
You can also click the up/down arrows to select the scaling rate.
4. Select the Size, Source, and Type in Paper Options.
5. Click OK or Print until you exit the Print window.

Fitting your document to a selected paper size

This printer feature allows you to scale your print job to any selected paper size regardless of the
document size. This can be useful when you want to check fine details on a small document.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
preferences.)
Printer Default: If you select this option, this feature is determined by the setting you've
made on the control panel of the machine.
None
Long Edge: This option is the conventional layout used in bookbinding.
Short Edge: This option is the conventional layout used in calendars.
Reverse Double-Sided Printing: Check this option to reverse the print order when duplex
printing.
preferences.)
manuals search engine
87
Page 7 of 23
8/4/2009