Linux Scanning - Muratec MFX-3550 User Manual

Scanning
4. Click Devices and click Browse Devices.
5. For Mac OS X 10.4:
Select your machine in Twain devices option. Make sure that Use TWAIN software checkbox is
checked, and click Connect.
For Mac OS X 10.5:
Make sure that Connected checkbox is checked beside your machine in Bonjour Devices.
If you want to scan using TWAIN, refer to the Mac OS X10.4 steps above.
6. Set the scan options on this program.
7. Scan and save your scanned image.
Setting scan information in Scan Manager
To find out about Scan Manager program information, to check the installed scan driver's
condition, to change scan settings. and to add or delete the folders where scanned documents to
computer are saved in Scan Manager program, follow these instructions:
1. From the Smart Panel menu on Status bar, click Scan Manager.
2. Select the appropriate machine from the Scan Manager .
3. Press Properties.
4. Use Set Scan Button to change the file destination or scan settings, to add or delete
5. When done, press OK.

LINUX SCANNING

You can scan a document using the Unified Driver Configurator window.
Scanning
1. Double-click the Unified Driver Configurator on your desktop.
2. Click the
3. Select the scanner on the list.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
If a warning message appears, click Change Port.. to select port.
If TWAIN UI appears, from the Preference tab, click Change Port.. to select port.
Refer to Scan Manager for Change port.. use. (See
Manager.)
For more information about using Image Capture,refer to the Image Capture's help.
Use TWAIN-compliant softwares to apply more scan options.
You can also scan using TWAIN-compliant softwares, such as Adobe Photoshop.
Scan process differ according to TWAIN-compliant softwares. Please refer to the user's guide
of the software.
If scanning does not operate in Image Capture, update Mac OS to the latest version.
Image Capture operates properly in Mac OS X 10.3.9 or higher and Mac OS X 10.4.7 or
higher.
application programs, and to format files. You can change the scanning machine by using
Change port. (Local or Network)
button to switch to Scanners Configuration.
manuals search engine
Setting scan information in Scan
122
Page 12 of 16
8/4/2009