Easystart (Initial Setting); Clearing Stored Settings; Language Settings; Getting Started - Muratec MFX-2530 Operating Instructions Manual

EasyStart (Initial setting)

EasyStart software is already installed on your Muratec machine. It guides you
through the process of entering your machine's settings.
Remember that the settings you make here can always be changed later.

Clearing stored settings

Before using EasyStart, clear your machine's built-in user data memory. This
ensures the memory will hold only your settings.
Important: After you use EasyStart, do not clear the memory again unless an
authorized technician asks you to do so.
To clear the machine's memory:
1
Press , *, 2. The
MENU LCD
to clear the memory.
Note: If you don't want to clear the memory,
just press [Cancel].
2
If you do want to clear the memory, press
[Enter].

Language settings

English is the language your machine initially displays on the
reports. But you can set it to "speak" French or Spanish, too.
As you give the order for the machine to change languages, it "rolls" from English to
French to Spanish, and then back to English.
To make the change from one language to the next, press
All manuals and user guides at all-guides.com
User data clear
Check
now asks if you want
MENU
Cancel Enter
and uses to print
LCD
, #.

Getting started

Determine the following before you go any furth
1
The type of dialing your telephone syste
pulse (rotary) dialing.
2
The name and fax number you want t
Every fax page you send arrives at the rec
text at the very top of the page. This text l
which are called a Transmit Terminal Ide
than 22 characters.

Entering initial settings

Important: If you press
RESET
mode (its normal condition). But it
pressing [Enter] as described in t
1
Press to change to Fax mode, if the m
FAX
2
Press , [Fax Set],
MENU
The shows the current calendar/clock
LCD
under the first digit.
3
Use the numeric keypad to enter the corre
date and time, using a 24-hour format for
time. For instance, to set 1:30
26, 2001, press 2 0 0 1 1 1 2 6 1 3 3 0.
Note: Your machine automatically inser
spaces and date-slash. All you hav
do is enter the digits.
To change a digit, press the cursor key to
rect digit.
during EasySta
, [Enter].
I
on Novem
PM