Configuring Printer Properties - Muratec MFX-3550 User Manual

Printing

Configuring Printer Properties

Using the Printer Properties window provided by the Printers configuration, you can change the
various properties for your machine as a printer.
1. Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.
2. Select your machine on the available printers list and click Properties.
3. The Printer Properties window opens.
The following five tabs display at the top of the window:
4. Click OK to apply the changes and close the Printer Properties window.
PRINTING WITH PS DRIVER
PS printer driver PPD file is provided on the supplied software CD.
If you select Typical installation for a local printer or Typical installation for a network printer
when installing machine's driver, PS driver will automatically be installed. (See
connected machine's
After installing the memory module, you need to select it in the printer properties of the PostScript
printer driver in order to use it. (See
1. Open the document you want to print.
2. Select Print from the File menu. The Print window appears. It may look slightly different depending
on your application.
The basic print settings are selected within the Print window. These settings include the number of
copies and print range.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
General: This option allows you to change the printer location and name. The name entered in
this tab displays on the printer list in Printers configuration.
Connection: This option allows you to view or select another port. If you change the machine
port from USB to parallel or vice versa while in use, you must re-configure the machine port in
this tab.
Driver: This option allows you to view or select another machine driver. By clicking Options,
you can set the default device options.
Jobs: This option shows the list of print jobs. Click Cancel job to cancel the selected job and
select the Show completed jobs check box to see previous jobs on the job list.
Classes: This option shows the class that your machine is in. Click Add to Class to add your
machine to a specific class or click Remove from Class to remove the machine from the
selected class.
driver.)
manuals search engine
Activating the added accessories in PS printer
99
Page 19 of 23
Installing USB
properties.)
8/4/2009