Muratec MFX-3550 User Manual page 30

Getting started
CPU
RAM
Free HDD space
INSTALLING USB CONNECTED MACHINE'S DRIVER
A locally connected machine is a machine directly attached to your computer using the USB cable. If
your machine is attached to a network, skip the following steps below and go on to installing network
connected machine's driver. (See
Selecting Custom installation allows you to choose programs to install.
Only use an USB cable no longer then 3m (118 inch. ). Data might not be transferred to your
machine.
Windows
You can install the machine software using the typical or custom method.
The following steps below are recommended for most users who use a machine directly connected to
your computer. All components necessary for machine operations will be installed.
1. Make sure that the machine is connected to your computer and powered on.
2. Insert the supplied software CD into your CD-ROM drive.
3. Click Next.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
RedHat Enterprise Linux WS 4, 5 (32/64bit)
Fedora Core 1~7 (32/64bit)
Mandrake 9.2 (32bit), 10.0, 10.1 (32/64bit)
Mandriva 2005, 2006, 2007 (32/64bit)
SuSE Linux 8.2, 9.0, 9.1 (32bit)
SuSE Linux 9.2, 9.3, 10.0, 10.1, 10.2 (32/64bit)
SuSE Linux Enterprise Desktop 9, 10 (32/64bit)
Ubuntu 6.06, 6.10, 7.04 (32/64bit)
Debian 3.1, 4.0 (32/64bit)
Pentium IV 2.4GHz (IntelCore2)
512 MB (1024 MB)
1 GB (2GB)
It is necessary to claim swap partition of 300 MB or larger for working with large scanned
images.
The Linux scanner driver supports the optical resolution at maximum.
Installing wired network connected machine's
If the "New Hardware Wizard" window appears during the installation procedure, click
the upper right corner of the box to close the window, or click Cancel.
The software CD should automatically run and an installation window appear.
If the installation window does not appear, click Start and then Run. Type X:\Setup.exe,
replacing "X" with the letter which represents your drive. Click OK.
If you use Windows Vista, click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing "X" with the letter which represents your drive and click OK.
If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run
program field, and click Continue in the User Account Control windows.
manuals search engine
29
Page 4 of 10
driver.)
in
8/4/2009