Deciding The Form Of Copy Output; Setting Copy Timeout - Muratec MFX-3550 User Manual

Copying
1->2Side Long: Prints pages to be read like a book.
1->2Side Short: Prints pages to be read by flipping like a note pad.
6. Press OK to save your selection.
7. Start copying a document.

DECIDING THE FORM OF COPY OUTPUT

You can set the machine to sort the copy job. For example, if you make 2 copies of a 3 page original,
one complete 3 page document will print follwed by a second complete document.
1. Press Copy on the control panel.
2. Place originals, face up, in the document feeder. Or you can use the scanner glass with a single
original document face down and closed the scanner lid.
3. Press OK and enter the number of copies using the number keypad.
4. Press Menu on the control panel.
5. Press the up/down arrow to highlight Copy Setup and press OK.
6. Press the up/down arrow to highlight Change Default and press OK.
7. Press the up/down arrow to highlight Collation and press OK.
8. Press the up/down arrow to highlight On and press OK.
On: Prints output in sets to match the sequence of originals.
Off: Prints output sorted into stacks of individual pages.
9. Press Start to begin copying.
One complete document will print followed by the second complete document.

SETTING COPY TIMEOUT

You can set the time the machine waits before it restores the default copy settings, if you do not start
copying after changing them on the control panel.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Machine Setup and press OK.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com manuals search engine
109
Page 6 of 7
8/4/2009