Poster Copying - Muratec MFX-3550 User Manual

Copying
4. Press OK on the control panel.
Your machine begins scanning the front side and shows Place Rear Side Press OK.
5. Turn the original over and place it on the scanner glass, where arrows indicate as shown then,
close the scanner lid.
6. Press OK on the control panel to begin copying.
2-up or 4-up copying (N-up)
The machine reduces the size of the original images and prints 2 or 4 pages onto one sheet of
paper.
2 or 4-up copying is available only when you load originals into the document feeder.
1. Press Copy on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Copy Feature and press OK.
4. Press the up/down arrow to highlight Layout and press OK.
5. Press the up/down arrow until 2-Up or 4-Up highlights and press OK.
6. Press Stop/Clear to return to ready mode.
You cannot adjust the copy size using the Reduce/Enlarge for the N-Up feature.

Poster copying

Your original will be divided into 9 portions. You can paste the printed pages together to make one
poster-sized document.
This copy feature is available only when you place originals on the scanner glass.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
If the original is larger than the printable area, some portions may not be printed.
If you don't press the OK button, only the front side will be copied.
If you press Stop/Clear, the machine cancles the copy job and returns to ready mode.
manuals search engine
107
Page 4 of 7
8/4/2009