Sending A Priority Fax; Receiving A Fax; Changing The Receive Modes - Muratec MFX-3550 User Manual

Faxing
6. Press Stop/Clear to return to ready mode.
Canceling a reserved delay fax job
You can add additional documents to the delayed fax job which is saved in memory.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight Fax Feature and press OK.
3. Press the up/down arrow to highlight Cancel Job and press OK.
4. Press the up/down arrow until the fax job you want appears and press OK.
5. Press OK when Yes highlights.
6. Press Stop/Clear to return to ready mode.

Sending a priority fax

This function is used when a high priority fax need to be sent ahead of reserved operations. The
original is scanned into memory and immediately transmitted when the current operation is finished.
In addition, priority transmission will interrupt a sending to multiple destinations between stations
(example, when the transmission to station A ends, before transmission to station B begins) or
between redial attempts.
1. Press Fax on the control panel.
2. Load originals face up into the document feeder, or place a single original face down on the
scanner glass.
3. Adjust the resolution and the darkness to suit your fax needs. (See
settings.)
4. Press Menu on the control panel.
5. Press the up/down arrow to highlight Fax Feature and press OK.
6. Press the up/down arrow to highlight Priority Send and press OK.
7. Enter the number of the receiving fax machine and press OK.
You can press speed dial numbers or select group dial number using Address book button. For
details, see
8. Enter the job name you want and press OK.
The original is scanned into memory before transmission.
9. If an original is placed on the scanner glass, select Yes to add another pages. Load another
original and press OK.
When you have finished, select No at the Another Page? prompt.
The machine starts to scan and send a fax to destinations.

RECEIVING A FAX

This part explains how to receive a fax, and the special receiving methods available.

Changing the receive modes

Your machine is preset to Fax mode at the factory. When you receive a fax, the machine answers
the call on a specified number of rings and automatically receives the fax. But if you want to change
the Fax mode to another mode, follow the steps below:
1. Press Fax on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Fax Setup and press OK.
4. Press the up/down arrow to highlight Receiving and press OK.
5. Press the up/down arrow to highlight Receive Mode and press OK.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
When you have finished, select No at the Another Page? prompt. The machine scans the
original into memory.
The selected fax is deleted from memory.
Setting up address
manuals search engine
book.
131
Page 5 of 14
Adjusting the document
8/4/2009