Network Setup; Network Environment - Muratec MFX-3550 User Manual

Network setup

Network setup
This chapter gives you step-by-step instructions for setting up the network connected machine and
software.
This chapter includes:

Network environment

Introducing useful network programs
Using a wired network
Using a wireless network
NETWORK ENVIRONMENT
You need to set up the network protocols on the machine to use it as your network machine. You can
set up the basic network settings through the machine's control panel.
The following table shows the network environments supported by the machine:
Network interface
Network operating
system
Network protocols
Wireless security
INTRODUCING USEFUL NETWORK PROGRAMS
There are several programs available to setup the network settings easily in network environment. For
the network administrator especially, managing several machines on the network is possible.
Before using the programs below, set the IP address first.
SyncThru™ Web Service
Web server embedded on your network machine, which allows you to:
Configure the network parameters necessary for the machine to connect to various network
environments.
Customize machine settings.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
ITEM
Ethernet 10/100 Base-TX
802.11 b/g Wireless LAN (Optional)
Windows 2000/XP/2003/2008/Vista
Various Linux OS
Mac OS X 10.3 ~ 10.5
TCP/IP
Standard TCP/IP
HTTP
DHCP
SNMP
BOOTP
LDAP
SMTP
Authentication: Open System, Shared Key, WPA Personal, WPA2
Personal(PSK)
Encryption: WEP64, WEP128, TKIP, AES
manuals search engine
REQUIREMENTS
36
Page 1 of 24
8/4/2009