Configuring The Machine's Wireless Network - Muratec MFX-3550 User Manual

Network setup
2. When the SyncThru™ Web Service window opens, click Network Settings.
3. Click Reset. Then, click Clear for network.
4. Turn off and restart machine to apply settings.

Configuring the machine's wireless network

Before starting you will need to know the network name(SSID) of your wireless network and the
network key if it is encrypted. This information was set when the wireless router(access point) was
installed. If you do not know about your wireless environment, please ask the person who has set
up your network.
To configure wireless parameters, you can use both control panel and SyncThru™ Web Service.
Using the control panel
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight Network and press OK.
3. Press the up/down arrow to highlight Wireless and press OK.
4. Press the up/down arrow to highlight WLAN Settings and press OK.
5. Press the up/down arrow to select the setup method you want highlights and press OK.
Wizard mode
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
You can also set the factory default settings on the control panel. Select Clear Settings in
Network menu. (See "Network" on page 96.)
Wizard: The wireless network interface card in your printer searches for wireless networks
in the area and shows the results.
Custom: You can configure the wireless settings according to your needs.
manuals search engine
49
Page 14 of 24
8/4/2009