Muratec MFX-3550 User Manual page 58

Network setup
5. After the installation is finished, a window asking you to print a test page appears. If you choose to
print a test page, select the checkbox and click Next. Otherwise, just click Next and skip.
6. If the test page prints out correctly, click Yes.
If not, click No to reprint it.
7. Click Finish.
If the printer driver does not work properly, uninstall the driver and reinstall it.
For windows follow the steps below to uninstall the driver.
Macintosh
1. Make sure that the machine is connected to your network and powered on. Also, your machine's IP
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
If you do not see your machine on the list, click Update to refresh the list, or select Add
TCP/IP Port to add your machine to the network. To add the machine to the network,
enter the port name and the IP address for the machine. To verify your machine's IP
address or the MAC address, print a Network Configuration page.
To find a shared machine (UNC Path), select Shared Printer [UNC] and enter the shared
name manually or find a shared printer by clicking the Browse button.
If you cannot find your machine in network,turn off the firewall and click Update. For
Windows operating system, click Start > Control Panel > Windows Firewall, and
inactivate this option. For other operating system, refer to its on-line guide.
1. Make sure that the machine is connected to your computer and powered on.
2. From the Start menu, select Programs or All Programs > your printer driver name >
Maintenance.
3. Select Remove and click Next.
You will see a component list so that you can remove any item individually.
4. Select the components you want to remove and then click Next.
5. When your computer asks you to confirm your selection, click Yes.
The selected driver and all of its components are removed from your computer.
6. After the software is removed, click Finish.
manuals search engine
57
Page 22 of 24
8/4/2009