Forwarding A Fax To Other Destination - Muratec MFX-3550 User Manual

Faxing
Before starting a fax, change the following settings according to your original's status to get the best
quality.
Resolution
The default document settings procedure good results when using typical text-based originals.
However, if you send originals that are of poor quality, or contain photographs, you can adjust the
resolution to produce a higher quality fax.
1. Press Fax on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Fax Feature and press OK.
4. Press the up/down arrow to highlight Resolution and press OK.
5. Press the up/down arrow until the option you want highlights and press OK.
6. Press Stop/Clear to return to ready mode.
Recommended resolution settings for different original document types are described in the table
below:
MODE
Standard
Fine
Super
Fine
Photo Fax Originals containing shades of gray or photographs.
Color Fax
The resolution setting is applied to the current fax job. To change the default setting, see
Change
Darkness
You can select the degree of darkness of the original document.
1. Press Fax on the control panel.
2. Press Menu on the control panel.
3. Press the up/down arrow to highlight Fax Feature and press OK.
4. Press the up/down arrow to highlight Darkness and press OK.
5. Press the up/down arrow until the option you want highlights and press OK.
6. Press Stop/Clear to return to ready mode.
The darkness setting is applied to the current fax job. To change the default setting, see
Default.

FORWARDING A FAX TO OTHER DESTINATION

You can set the machine to forward the received or sent fax to other destination by a fax, an email or
a server. If you are out of office but have to receive the fax, this feature may be useful.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
Originals with normal sized characters.
Originals containing small characters or thin lines or originals printed using a dot-
matrix printer.
Originals containing extremely fine detail. Super Fine mode is enabled only if the
machine with which you are communicating also supports the Super Fine resolution.
For memory transmission, Super Fine mode is not available. The resolution
setting is automatically changed to Fine
When your machine is set to Super Fine resolution and the fax machine with
which you are communicating does not support Super Fine resolution, the
machine transmits using the highest resolution mode supported by the other fax
machine.
Originals with colors. Sending a color fax is enabled only if the machine with which you
are communicating supports color fax reception and you send the fax manually. In this
mode, memory transmission is not available.
Default.
manuals search engine
RECOMMENDED FOR:
135
Page 9 of 14
Change
8/4/2009