Muratec MFX-3550 User Manual page 34

Getting started
The supplied software CD provides you with the Unified Linux Driver package for using your
machine with a Linux computer easily in UI based management tool.(See
Unified Driver
1. Make sure that the machine is connected to your computer and powered on.
2. When the Administrator Login window appears, type in "root" in the Login field and enter the
system password.
3. Insert the supplied software CD into your CD-ROM drive.
The software CD will run automatically.
If the software CD does not run automatically, click the
When the Terminal screen appears, type in the following:
If the software CD is secondary master and the location to mount is /mnt/cdrom,
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost Linux]#./install.sh
If you still failed to run the software CD , type the followings in sequence:
[root@localhost root]#umount /dev/hdc
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/cdrom
4. When the welcome screen appears, click Next.
5. When the installation is complete, click Finish.
The installation program has added the Unified Driver Configurator desktop icon and the Unified
Driver group to the system menu for your convenience. If you have any difficulties, consult the on
screen help that is available through your system menu or can otherwise be called from the driver
package Windows applications, such as Unified Driver Configurator or Image Manager.
Installing the driver in the text mode:
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
Configurator.)
You must log in as a super user (root) to install the machine software. If you are not a super
user, ask your system administrator.
The installation program runs automatically if you have an autorun software package installed
and configured.
If you do not use the graphical interface or have been unable to install the driver, you have
to use the driver in the text mode.
Follow the steps 1 to 3, then type [root@localhost Linux]# ./install.sh. Follow the
instructions on the terminal screen. The installation is completed.
When you want to uninstall the driver, follow the installation instructions above, but type
[root@localhost Linux]# ./uninstall.sh on the terminal screen.
manuals search engine
icon at the bottom of the desktop.
33
Page 8 of 10
Using the Linux
8/4/2009