Loading Paper In The Tray - Muratec MFX-3550 User Manual

Media and tray

LOADING PAPER IN THE TRAY

Tray 1 / optional tray
Load the print media you use for the majority of your print jobs into tray 1. Tray 1 can hold a
maximum of 250 sheets of plain paper.
You can purchase an optional tray and attach it below the standard tray to load an additional
250 sheets of plain paper. (See
The paper level indicator on the front of the tray 1 and the optional tray 2 shows the amount of
paper currently left in the tray. When the tray is empty, the indicator of the bar is completely
lowered.
Using photographic paper or coated paper may cause problems, requiring repairs. Such repairs
are not covered by the warranty or service agreements.
1. Pull out tray. And adjust the tray size to the media size you are loading. (See
size.)
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
Do not push the paper width guide too far causing the media to warp.
If you do not adjust the paper width guide, it may cause paper jams.
Available
1. Full
2. Empty
manuals search engine
accessories.)
72
Page 6 of 14
Changing the tray
8/4/2009