Samsung Scan Manager Problem; Common Postscript Problems - Muratec MFX-3550 User Manual

Troubleshooting
The machine does not send.
The incoming fax has blank
spaces or is of poor-quality.
Some of the words on an
incoming fax are stretched.
There are lines on the originals
you sent.
The machine dials a number, but
the connection with the other fax
machine fails.
Faxes do not store in memory.
Blank areas appear at the bottom
of each page or on other pages,
with a small strip of text at the
top

Samsung Scan Manager Problem

Scan Manager
does not work.

Common PostScript problems

The following situations are PS language specific and may occur when several printer languages are
used.
PostScript file cannot be
printed.
"Limit Check Error" report
prints.
A PostScript error page
prints.
The optional tray is not
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/t... www.Manualslib.com
CONDITION
Check your system requirements. Scan Manager works in
Window and Macintosh (See
PROBLEM POSSIBLE CAUSE
The PostScript driver
may not be installed
correctly.
The print job was too
complex.
The print job may not be
PostScript.
The printer driver has
manuals search engine
Check to see if the display shows any error message. If it
does, clear the problem
Make sure that the original is loaded in the document
feeder or on the scanner glass.
Check the fax machine you are sending to, to see if it can
receive your fax.
The fax machine sending you the fax may be faulty.
A noisy phone line can cause line errors.
Check your machine by making a copy.
The toner cartridge may be empty. Replace the toner
cartridge. (See Replacing the toner
The fax machine sending the fax had a temporary document
jam.
Check your scan unit for marks and clean it. (See
scan unit.)
The other fax machine may be turned off, out of paper, or
cannot answer incoming calls. Speak with the other machine
operator and ask her/him to solve out the problem.
There may not be enough memory space to store the fax. If
the display indicating the memory status shows, delete any
faxes you no longer need from the memory, and then try to
store the fax again. Call for service.
You may have chosen the wrong paper settings in the user
option setting. For details about paper settings. (See
the paper size and type.)
SUGGESTED SOLUTION
System
Install the PostScript driver. (See
Installing USB connected machine's
driver.)
Print a configuration page and verify
that the PS version is available for
printing.
If the problem persists, contact a
service representative.
You might need to reduce the complexity
of the page or install more memory. (See
Installing a memory
Make sure that the print job is a PostScript
job. Check to see whether the software
application expected a setup or PostScript
header file to be sent to the machine.
Open the PostScript driver properties,
195
Page 24 of 27
cartridge.)
Cleaning the
Setting
requirements.)
SOLUTION
module.)
8/4/2009