Muratec MFX-3550 User Manual page 43

Network setup
5. The list of machines available on the network appears. Select the machine you want to install
6. After the installation is finished, a window asking you to print a test page appears. If you
7. If the test page prints out correctly, click Yes.
8.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
3. Click Next, and go to step 6.
4. You can also set the network printer via SyncThru Web Service, an embedded web
server. Click Launch SWS on Set IP Address windows. Your machine's embedded
website opens.
from the list and then click Next.
If you do not see your machine on the list, click Update to refresh the list, or select
Add TCP/IP Port to add your machine to the network. To add the machine to the
network, enter the port name and the IP address for the machine. To verify your
machine's IP address or the MAC address, print a Network Configuration page.
To find a shared machine (UNC Path), select Shared Printer [UNC] and enter the
shared name manually or find a shared printer by clicking the Browse button.
If you cannot find your machine in network,turn off the firewall and click Update. For
Windows operating system, click Start > Control Panel > Windows Firewall, and
inactivate this option. For other operating system, refer to its on-line guide.
choose to print a test page, select the checkbox and click Next. Otherwise, just click Next and
skip.
If not, click No to reprint it.
Click Finish.
If the printer driver does not work properly, uninstall the driver and reinstall it.
For windows follow the steps below to uninstall the driver.
1. Make sure that the machine is connected to your computer and powered on.
2. From the Start menu, select Programs or All Programs > your printer driver name
> Maintenance.
3. Select Remove and click Next.
You will see a component list so that you can remove any item individually.
manuals search engine
42
Page 7 of 24
8/4/2009