Keypad Letters And Numbers; Correcting Numbers Or Names; Inserting A Pause; Using The Save Modes - Muratec MFX-3550 User Manual

Basic setup
Press the button until the correct letter appears on the display.
For example, to enter the letter O, press 6, labeled with MNO.
Each time you press 6, the display shows a different letter, M, N, O, m, n, o and finally 6.
You can enter special characters, such as space, plus sign, and etc. For details, see the below
section.
2. To enter additional letters, repeat step 1.
If the next letter is printed on the same button, move the cursor by pressing the left/right arrow
button and then press the button labeled with the letter you want. The cursor will move to the
right and the next letter will appear on the display.
You can enter a space by pressing 1 twice.
3. When you have finished entering letters, press OK.

Keypad letters and numbers

KEY
1
2
3
4
5
6
7
8
9
0
*
#

Correcting numbers or names

If you make a mistake while entering a number or name, press the left/right arrow button to delete
the last digit or character. Then enter the correct number or character.

Inserting a pause

With some telephone systems, you must dial an access code (9, for example) and listen for a second
dial tone. In such cases, you must insert a pause in the telephone number. You can insert a pause
while you are setting up speed dial numbers.To insert a pause, press Redial/Pause at the
appropriate place while entering the telephone number. A - appears on the display at the
corresponding location.

USING THE SAVE MODES

Using toner saving feature

Toner save mode allows your machine to use less toner on each page. Activating this mode extends
the life of the toner cartridge beyond what one would experience in the normal mode, but it reduces
print quality.
1. Press Menu on the control panel.
2. Press the up/down arrow to highlight System Setup and press OK.
3. Press the up/down arrow to highlight Machine Setup and press OK.
4. Press the up/down arrow to highlight Toner Save and press OK.
5. Press the up/down arrow to highlight On and press OK.
6. Press Stop/Clear to return to ready mode.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
ASSIGNED NUMBERS, LETTERS, OR CHARACTERS
@ / . ' 1
A B C a b c 2
D E F d e f 3
G H I g h i 4
J K L j k l 5
M N O m n o 6
P Q R S p q r s 7
T U V t u v 8
W X Y Z w x y z 9
& + - , 0
*
#
When PC-printing, you can also turn on or off toner save mode in the printer properties.
manuals search engine
63
Page 4 of 7
8/4/2009