Registering Local Authorized Users - Muratec MFX-3550 User Manual

Scanning
SETTING AUTHENTICATION FOR AUTHORIZED USER
If you have connected your machine to a network and set up the network parameters correctly, you
can scan and send images over the network.
To send a scanned image through email or via network server safely, you must register account
information of authorized users to your local machine using SyncThru™ Web Service.
If user authentication has been activated, only authorized local users can send scanned data to the
network (email, FTP, SMB).
For network scanning using the authentication feature, you must register the network or local
authentication configuration using the SyncThru™ Web Service.
User authentication has 2 options: No Authentication (Default) and Require Local
Authentication.

Registering local authorized users

1. Turn your networked computer on and open the web browser.
2. Enter your machine's IP address as the URL in a browser.
3. Click Go to access the SyncThru™ Web Service.
4. Click Machine Settings > User Authentication.
5. Select Require Local Authentication in the Setup section.
6. Click Apply.
7. Click OK in the modifying confirmation pop-up window.
8. Select Local Authentication in the left pane.
9. Click Add.
10. Select an index number corresponding to the location for storing the entry, from 1 to 500.
11. Enter User Name, Auth ID, Password, E-mail Address and Phone number.
You need to enter the registered user ID and password in the machine when you start scanning to
email from the control panel.
12. Click Apply.
USING SCAN MANAGER
If you have installed the printer driver, Scan Manager program has installed too. Start
Scan Manager program to find out about this program information and the installed scan
driver's condition. Through this program, you can change scan settings and add or delete the folders
where scanned documents are saved in your computer.
The Scan Manager program can only be used in the Window and Macintosh system. If
you use the Macintosh, See
1. From the Start menu, click Control Panel > Scan Manager.
You can open Scan Manager by right clicking the Smart Panel icon in the Windows task
bar and seleting Scan Manager.
2. Select the appropriate machine from the Scan Manager window.
3. Press Properties.
4. The Set Scan Button tab allows you to change the saving destination and scan settings, add or
delete application program, and format files.
You can change the scanning machine by using the Change Port tab. (Local or Network)
5. When setting is done, press OK.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/... www.Manualslib.com
If you have not set Default[From:] Address in SMTP Client Setup, the notifying pop-up
window appears. Click OK to browse the Web page where you can set the default email
address.
Setting scan information in Scan
manuals search engine
Manager.
117
Page 7 of 16
8/4/2009