Understanding The Status Led; Introducing The Useful Buttons; Power Saver Button - Muratec MFX-3550 User Manual

Introduction
11 Back
12 Numeric keypad
13
Address Book
14
Redial/Pause
15 On Hook Dial
16
Stop/Clear
17
Power Saver
18 Start

UNDERSTANDING THE STATUS LED

The color of the status LED indicates the machine's current status.
STATUS
Off
Green
Red
Check the message on the display screen. Follow the instructions in the message or refer to
troubleshooting part. (See
service.

INTRODUCING THE USEFUL BUTTONS

Power Saver button

When the machine is not in use, save electricity by pressing the Power Saver button. Pressing this
button for one second puts the machine into power save mode. (See
If you press this button for more than three seconds, a pop-up appears, requesting that you turn
the power off. If you choose Yes, the power is turned off. This button can also be used to turn the
button on.
Downloaded from http://downloadcenter.samsung.com/content/UM/200907/20090721152022250/EN/english/i... www.Manualslib.com
Sends you back to the upper menu level.
Dials fax number, and enters the number value for document copies or other
options.
Allows you to store frequently used fax numbers and email addresses or search
for stored fax numbers or email addresses.
In standby mode, redials the last number. Also in edit mode, inserts a pause
into a fax number.
Performs same as you hold a handset under the telephone line is engaged.
Stops an operation at any time. The pop-up window appears on the screen
showing the current job that the user can stop or resume.
Sends the machine into power saver mode. If you press and hold this button,
you can also turn the power on and off. (See
Starts a job.
The machine is off-line.
The machine is in power saver mode. When data is received, or any button is
pressed, it switches to on-line automatically.
Blinking
When the backlight slowly blinks, the machine is receiving data from the
computer.
When the backlight blinks rapidly, the machine is printing data.
On The machine is on-line and can be used.
Blinking
A minor error has occurred and the machine is waiting for the error to be
cleared. Check the display message. When the problem is cleared, the machine
resumes.
The toner cartridge is near the end of its life. Order a new toner cartridge. You
can temporarily improve print quality by redistributing the toner. (See
the toner cartridge,
On
The toner cartridge is empty. Remove the old toner cartridge and install a new
one. (See Replacing the toner
A paper jam has occurred. (See
The cover is opened. Close the cover.
There is no paper in the tray. Load paper in the tray.
The machine has stopped due to a major error. Check the display message.
(See Understanding display
Understanding display
manuals search engine
DESCRIPTION
Redistributing toner.)
cartridge.)
Clearing paper
messages.)
messages.) If the problem persists, call for
24
Page 3 of 4
Power Saver button .)
Replacing
jams.)
Using power saving feature.)
8/4/2009