Sending A Fax By Recalling A Fax Program Key - Muratec MFX-C2280 Feature Overview Manual

Sending a Fax by Recalling a Fax Program Key

PRE-REqUISITES
APPLICATION
Customer uses the same combination of settings
each week to send out reports . They want to store
the frequently-used settings in a program key to
reduce keystrokes in order to improve productivity
and minimize fax transmission errors . This job shop
provides the instructions on how to recall the Fax Program Key that was registered
in the previous Job Shops (Registering a Fax Program Key)
1 . Load the Original .
2 . Touch Scan/Fax .
3 . Tap the Program key .
4 . Select the Program key
(the registered settings
of the program are
automatically enabled) .
5 . Specify the Destination
(if it was not included
in the registered
Program key) .
6 . Touch Recall .
7 . Press Start .
12
You can register up to
400 Fax/Scan Programs.
If not on the home screen,
touch the Menu key on
the Control Panel .