Sending A Fax; Using Memory Transmission; Sending A Fax From The Adf - Muratec MFX-2530 Operating Instructions Manual

Sending a fax

Using memory transmission

Your fax machine has a great memory! Take advantage of it, and you could:
Save Time. By using your fax machine's memory, you won't have to wait for your
machine while it completes the transmission. Simply scan your document into your
fax machine's memory, and you can walk away with your original in hand.
Save Money. If you're transmitting to another memory-equipped fax machine, your
machine will send the document directly into the other machine's memory and hang
up. (The receiving machine then prints out your message from its memory after the
call has ended.) This cuts your actual on-line time to a minimum.
Save Even More Money. Set up a delayed command (see page 3.25) to send your
document after hours, and you can save more money, because the line charges will
be cheaper.
The default transmission mode when the machine is turned on or when modes are
cleared is memory transmission. You can change this setting, see below.
Note: Whether you decide to send your documents from memory or manually, you
can override that choice one transmission at a time by pressing
before you send your document. After completing the
MEMORY TRANSMIT
communication, your fax will return to the default setting.
Note: If you want to change the default setting of transmission mode, see "Memory
transmission," on page 3.70.
Note: Some documents use up memory faster than others. They include
documents with many pages and those with many dark areas. When the
machine's memory is full, it can only transmit through the document feeder.
Note: When you send a fax using the
used automatically, even if the memory transmission is not set.
If the light glows, memory transmission is on.
MEMORY TRANSMIT
If the light doesn't glow, memory transmission is off.
MEMORY TRANSMIT
All manuals and user guides at all-guides.com
glass, the memory transmission will be
FBS
Sending a fax from the
1
Adjust the document guides to fit the
page(s) you'll be faxing. Your fax
machine's will hold up to 50
ADF
sheets.
2
Align the edge of your documents and
stack them in the face up.
ADF
3
Adjust resolution and contrast if nec-
essary.
Press to change the resolutio
RESOLUTION
Press to change the contrast.
CONTRAST
4
Adjust memory transmission if necessary.
Press
MEMORY TRANSMISSION
5
Enter the fax number.
Enter any access codes necessary, just as y
(Example: Enter 9 to "dial out" from an of
distance.)
6
Press .
START
By pressing , you've just given your
START
machine gives this action a command num
This command number appears on the
while the machine is scanning the docume
You'll need to know this command numbe
you later wish to cancel the transmission
print a stored document (see pages 3.29–3
ADF
to toggle me
LC