Setting The Line Properties - Altigen AltiContact Manager Version 5.0A Administration Manual

Setting up Extensions
Setting VoIP Codecs
The default codec for static IP extensions is G.711, which gives a
bandwidth of approximately 64 kbps. This is appropriate for lease lines or
high-speed connections. The default codec for dynamic IP extensions is
G.723, which gives a bandwidth of approximately 6.4 kbps. This is
appropriate for internet connections.
You can change these defaults and set dynamic IP addressing ranges and
codecs for AltiContact Manager-to-AltiContact Manager connections
using the VoIP Codec Configuration window.
To set up the VoIP codec and configure IP extensions, refer to the VoIP
Codec Configuration section on page 9-5.

Setting the Line Properties

For a physical extension, you can configure hardware options on the board
port used for the extensions. To do so, select the extension number in the
list of extensions, then click the Line Properties button to open a dialog
box that is specific to the board using for the extension.
The Line Properties are somewhat different for Quantum Board than for
Triton Analog Station Boards. The subsequent sections deal first with
Quantum, then with Triton Analog Station.
14-10 AltiContact Manager Administration Manual