Table of Contents
Advertisement
Parameter
Description
3. (optional) You may select an IP extension from the Non
4. Enter digits in the Dial Pattern field and Translate To
5. The Manipulation option
Assigning Trunk, Feature, IP Trunk, & Route Access
You can use trunk, feature, IP trunk, and route access outgoing call options
alone or in combination when making the number plan assignments.
Trunk Access
Usually, 9 is used as the analog or PSTN trunk access code, and AltiContact
Manager uses 9 as the default for trunk access. You can keep that
configuration and assign other digits such as 7 or 8 to Route Access and IP
trunk access, or you can change it. There are no defaults for IP trunk or
Route Access.
Feature Access
By default, the first digit assignment for # is set to Feature Access, which
is used as part of feature access codes. In addition, you may also set 1- 9 or
* to Feature Access. For example, if 7 is set to Feature Access, Station
Login (#27) can also be accessed using 727.
IP Trunk Access
Only one IP trunk access option is allowed per AltiContact Manager
system. It is highly recommended that the same IP trunk access code (e.g.
8) be used for all AltiContact Manager systems in the network. To use
Voice over IP, you must set up this access and, in addition, configure the
IP Dialing Table as discussed in "Defining the IP Dialing Table" on page
9-2 and set the VoIP codecs as discussed in "Setting VoIP Codecs" on page
9-5.
members list that the Extension Dialed Digit Translator
will apply to. You can apply the same Members to
multiple locations. You may also enable the Bypass
Account Code option if Account Codes are required.
field. In the above example, when an IP extension user
in LA dials "911," AltiServ will translate the digits into
"8408911." (8 = IP trunk access code, 408 = Location
ID).
add digits to a number dialed by the IP extension.
AltiContact Manager Administration Manual 5-9
System Configuration
allows you to remove or
Advertisement
Table of Contents
Troubleshooting
