Altigen Telephony Boards - Altigen AltiContact Manager Version 5.0A Administration Manual

• Choose a work surface large enough to accommodate the entire
system.
• Use a flat, stable work surface with enough space around it for proper
air circulation. For proper heat dissipation, a fan is recommended in
front of the AltiGen telephony boards to ensure sufficient airflow. Be
sure the fan filter is clean and does not block the airflow.
The following table contains the operating specifications for the AltiGen
telephony board.
Table 3. AltiGen Board Operating Environmentals
(Condiciones Ambientales para La Operación de La Tarjeta AltiGen/Betriebsbedingungen
für die AltiGen Karte)
Description
(Descripcion/
Beschreibung)
Operating Temperature
Temperatura de Operacion/
Betriebstemperatur/
Storage Temperature
Temperatura de
Almacenamiento/
Lagerungstemperatur
Relative Humidity
Humedad Relativa/
Relative Luftfeuchtigkeit

AltiGen Telephony Boards

AltiGen telephony boards are installed into the AltiContact Manager
motherboard expansion slots or can be used individually as a third-party
developer application platform. To obtain maximum performance
reliability and long-term, fault-free operation, you must maintain power
and environmental conditions specified at the end of this section.
Note:
When installing VoIP boards, the recommended installation
procedure is to install the VoIP boards first, then set up the IP
extensions. If there are no VoIP boards in the system and no IP
extensions are loaded, then no IP extensions can be set up.
2-4 AltiContact Manager Administration Manual
Specification
(Especificacion/Spezifizierung)
0° to + 50° C/
0° a + 50° C/
0° bis + 50° C
-20° to +70° C/
-20° a +70° C/
-20° bis +70° C
10% to 80% non-condensing/
10% to 80% sin condensacion/
10% bis to 80% nicht-verdichtend