Altigen AltiContact Manager Version 5.0A Administration Manual page 334

Setting up Extensions
Parameter
Caller ID Signal
Format
Receiver Gain/
Transmission
Attenuation
Caution: Use caution in setting the Receiver Gain or the
Transmission Attenuation. If either setting is too high, the
result will be distortion in voice quality.
Triton Analog Station Line Properties
If you select a Triton Analog Station Board extension and click the Line
Properties button, you'll see the Triton Analog Station Line Properties
dialog box. Note that you can use the Apply to... button to apply these
hardware settings to one, some, or all ports on the board. Using Apply to...
is discussed "Apply To Button" on page 14-2.
You can also access this window by double-clicking a span in Channel
Mapping List of the Triton Analog Station Board configuration window.
14-12 AltiContact Manager Administration Manual
Description
Message format with which to send Caller ID
information:
• None
• SDMF—Single Data Message Format for
supporting and sending a single data type, such as
phone numbers.
• MDMF—Multiple Data Message Format for
supporting and sending multiple data types, such
as name and number information.
Incoming and outgoing volume for every extension.
Unlike the Quantum board, these slide settings have
positive and negative values. Both defaults are 0
decibels. The range is -3 to +3 decibels.