Getting Around Acm Administrator; Alticontact Manager Administrator; Logging In For The First Time - Altigen AltiContact Manager Version 5.0A Administration Manual

C 4
H A P T E R
Getting Around ACM
Administrator

AltiContact Manager Administrator

This section describes how to configure and administer the AltiWare
system using the AltiContact Manager application software.
The AltiContact Manager, or ACM, Administrator allows you to configure
sophisticated switching and messaging functions using windows that guide
you through the configuration steps for each feature.
ACM Administrator can be used at the AltiContact Manager system or on
any other system on the LAN for remote maintenance. On a remote
Windows 2000 or Windows 2003 client system on the LAN, ACM
Administrator allows control of one or more AltiContact Manager systems.
System Data Management, and Stop Switching Service cannot be
performed over the LAN.
Instructions for installing ACM Administrator are described in "Installing
ACM Administrator on Remote Systems" on page 3-43.

Logging in for the First Time

To access AltiContact Manager functions to configure and administer the
AltiContact Manager system, you must first log in as an administrator. The
first time you log in, use the system default password, "22222."
Important: To ensure system security, change the system password as
soon as possible. See "Changing the Password" on page 4-11.
AltiContact Manager Administration Manual 4-1