Table of Contents
Advertisement
Application Extension Setup
Figure 1. Application Extension Configuration window
To set up an Application Extension:
Note:
Before you begin, make sure to have an SDK Trunk Control
APC Session registered and activated for your system.
1.
Open the Application Extension Configuration window.
2.
In the Add Application Extension dialog box, click the Add button,
enter the extension number, and click OK.
Figure 2. Add Application Extension dialog box
3.
The Application Extension appears in the Application Extension List.
Continue adding application extensions as needed. Then refer to the
following sections for further configuration.
21-2 AltiContact Manager Administration Manual
Advertisement
Table of Contents
Troubleshooting
