Setting Dialing Pattern Routing - Altigen AltiContact Manager Version 5.0A Administration Manual

Setting Dialing Pattern Routing

Setting Dialing Pattern Routing
You can use the Dialing Pattern tab to create or disallow routing for
specific dialing patterns.
As noted in "About Restricting Outgoing Calls" on page 10-1, there are
three AltiContact Manager functions to restrict outcalls, of which the Call
Restriction setup of System Configuration takes precedence.
The Dialing Pattern tab provides for setting up blocks with specific
exceptions. For example, you could use this tab to block calls that begin
with 767, but to accept and route calls to 767-2676, by disallowing a "767"
entry while setting up and providing routing for a separate "767-2676"
entry.
Click the Dialing Pattern tab on the Out Call Routing Configuration
window to set dialing patterns.
Figure 4. Dialing Pattern tab, Out Call Routing Configuration
10-6 AltiContact Manager Administration Manual