Setting The Line Properties - Altigen ACM 6.5 Administration Manual

Setting up Extensions
Changing the Location
To change the location of a physical extension, select the extension number in the list of
extensions, then click the Prev or Next buttons to change the board and channel
settings until the location you want is displayed. Like other changes, this change isn't
finalized until you click Apply.

Setting the Line Properties

For a physical extension, you can configure hardware options on the port used for the
extensions. To do so, select the extension number in the list of extensions, then click the
Line Properties button to open a dialog box that is specific to the board used for the
extension.
Triton Analog Station Line Properties
If you select a Triton Analog Station Board extension and click the Line Properties
button, you'll see the Triton Analog Station Line Properties dialog box.
You can also access this window by double-clicking a span in Channel Mapping List of
the Triton Analog Station Board configuration window.
Figure 2. Triton Analog Station Line Properties dialog box
202
MAXCS ACM 6.5 Administration Manual