Table of Contents
Advertisement
AltiGen Board Installation
Always install Triton and Quantum boards and attach MVIP and power
cables prior to powering server on. Failure to do so may result in damage
to the board. When removing or connecting the MVIP cable, do so with a
slow, vertical motion. Do not use a side-to-side rocking motion to remove
the connector or by pulling the cable. Be careful to make sure pins in the
MVIP connector on the board line up with the sockets on the MVIP cable.
Failure to do so may result in pins being pushed down toward the bottom
of the MVIP connector on the board. The MVIP test will detect these errors.
For complete instructions on how to install Triton and Quantum boards,
please refer to the Quick Installation Guide, which is provided with every
AltiGen board package.
TritonDef.inf
When a new PCI board is installed in a Windows 2000 system, the OS will
detect the board and ask for a driver. The driver file for the boards
(TritonDef.inf) can be found in the following locations:
• Before installing AltiContact Manager: on the root directory of the
AltiContact Manager CD-ROM; this file will be installed when you
install the software.
• After installing AltiContact Manager: in the \AltiServ\SP directory on
your hard drive.
AltiGen Board Options
(Opciones de La Tarjeta AltiGen /AltiGen Kartenoptionen)
Table 4 lists the AltiGen telephony board modules. This selection allows
you to optimize your system based on the trunk/extension mix required at
your site.
La Tabla No. 2 lista los módulos de la tarjeta de telefonía AltiGen. Esta selección le permite
optimizar su sistema con base en la mezcla de troncales y extensiones que requiere su sitio.
In Tabelle 2 sind AltiGen Kartenmodule für das Fernsprechwesen aufgelistet. Diese Auswahl
erlaubt eine Optimierung ihrer Standortanlage mit der gewünschten Kombination von Haupt-
und Nebenanschlüssen.
AltiContact Manager Administration Manual
System Requirements
2-9
Advertisement
Table of Contents
Troubleshooting
