WS2000> admin(network.wlan.wlanipfpolicy)> add
Description:
Adds a new IP Filter association table entry. IP Filters have to be set up through the Network > IPFilter menu.
Syntax:
add
<wlan-idx> <filter-name> <direction> <action>
Adds a new IP Filter association table entry. The <filter-name> is the name of the filter to be added to
the WLAN specified by the <wlan-idx> (
<action> could be
Example:
admin(network.wlan.wlanipfpolicy)>
admin(network.wlan.wlanipfpolicy)>
admin(network.wlan.wlanipfpolicy)>
-----------------------------------------------------------------------------
Filter-Name
-----------------------------------------------------------------------------
allow_tcp
allow_tcp
IP Filter Mode
Default Incoming Action
Default Outgoing Action
). The <direction> could be
1-8
or
allow
deny.
add 1 allow_tcp incoming allow
add 1 allow_tcp outgoing deny
show 1
Direction
Action
incoming
allow
outgoing
deny
: enable
: allow
: allow
Command Line Interface Reference
or
incoming
outgoing
13-217
. The