Ws2000>Admin(System.config)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

13-266 WS2000 Wireless Switch System Reference Guide
WS2000>admin(system.config)> set
Description:
Sets the import/export parameters.
Syntax:
set server
user
passwd
file
fw
import-
enc-
password
cfgpath
Example:
FTP Set Example
admin(system.config)>set server 192.168.22.12
admin(system.config)>set user myadmin
admin(system.config)>set passwd
admin(system.config)>export ftp
Export operation
Building configuration file
File transfer
File transfer
Export operation
Firmware Example
admin(system.config)>set fw file mf_01050000160B.bin
admin(system.config)>set fw path /tftp/myadmin/
admin(system.config)>update tftp s1
<ipaddress
>
<username>
<pswd>
<filename>
file
<filename>
path
<pathname>
boot
on-board-
flash/
compact-flash
active-
primary/
secondary
partition
enable/
disable
<path>
Sets the FTP/TFTP server IP address (a.b.c.d).
Sets the FTP user name (up to 47 characters).
Sets the FTP password (up to 39 characters).
Sets the configuration file name (up to 39 characters).
Sets the firmware filename (up to 39 characters).
Sets the firmware file path (up to 39 characters).
Sets the firmware boot device to either the on board
flash or the compact flash card attached to the WS
2000 Wireless Switch.
Sets the active partition on the compact flash card.
Enables or disables the import of encrypted passwords
for the admin and manager logins.
Sets the configuration file path (up to 31 characters)
: [ Started ]
: [ Done ]
: [ In progress ]
: [ Done ]
: [ Done ]