Ws2000> Admin(Network.ipfilter)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

13-224 WS2000 Wireless Switch System Reference Guide
WS2000> admin(network.ipfilter)> set
Description:
Adds an entry into the global IP Filter table.
Syntax:
add
<filter-name> <protocol> <port> <start-
Adds an IP Filter with <filter-name> to the IP Filter table.
<protocol> can be one of
esp, ah, igmp, ipv6, compr_h, raw_ip
<port> is the port number. Could also be
<start-src-address> <end-src-address> is the source ip range for which this filter is applied
<start-dest-address>, <end-dest-address> is the destination ip range for which this filter is applied.
Example:
admin(network.ipfilter)>
0.0.0.0 0.0.0.0
admin(network.ipfilter)>
------------------------------------------------------------------------------
Filter-Name
------------------------------------------------------------------------------
allow_tcp
allow_udp
port80tcp
src-
address>
tcp, udp, icmp, pim, gre, rsvp, idp, pup, egp, ipip,
.
.
all
add port80tcp TCP 80 192.168.1.100 192.168.1.250
show
Protocol-Port Start-End-Src-IP
TCP 0.0.0.0
ALL 0.0.0.0
UDP 0.0.0.0
ALL 0.0.0.0
TCP 192.168.1.100
80 192.168.1.250
<end- <start-
src- dest-
address> address>
Start-End-Dst-IP In-Use
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
<end-dest-
address>
YES
NO
NO