Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual page 201

The WLAN Summary section of the screen shows basic statistics about the currently enabled WLANs.
Name The WLAN name.
Subnet Displays the name of the subnet that is associated with the WLANs.
MUs Displays the number of mobile units associated with this WLAN.
T-put Displays the total throughput in Megabits per second (Mbps) for each of the active WLANs.
ABS Displays the Average Bit Speed (ABS) in Megabits per second (Mbps) for each of the active
WLANs.
%NU Displays the percentage of the total packets for each active WLAN that are non-unicast
packets. Non-unicast packets include broadcast and multicast packets.
Retries Displays the average number of retries per packet. A high number in this field could indi-
cate possible network or hardware problems.
In the lower section of the screen, the
traffic.
Total pkts per Displays the average number of RF packets sent per second across all active
second WLANs on the wireless switch. The number in black represents this statistic for
the last 30 seconds and the number in blue represents this statistic for the last
hour.
Total bits per second Displays the average bits sent per second across all active WLANs on the wire-
less switch. The number in black displays this statistic for the last 30 seconds
and the number in blue displays this statistic for the last hour.
Total associated Displays current total number of Mobile Units associated with all the active
MUs WLANs on the wireless switch.
To clear the RF statistics, click the
Total Switch RF Traffic
Clear all RF Stats button.
Status & Statistics
table gives summary information about RF
11-9