The Access Overview Table; The Access Exception Area - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

3.3.1 The Access Overview Table

In the overview table, each of the rectangles represents a subnet association. The three possible colors
indicate the current access level, as defined, for each subnet association.
Color Access Type
Green Full Access
Yellow Limited
Access
Red No Access

3.3.2 The Access Exception Area

In the lower half of the screen, the access is controlled by specific rules that control the protocols that are
allowed or denied between the two subnets or the subnet and the WAN. All rules are added to the exception
table. The Allow or
(access rules) to the table. The first is by checking the checkboxes for specific protocols (on the left). The
second is by adding rules for specific port numbers by clicking the
information. A combination of the two methods can be used to add multiple entries to the table.
You can allow or deny communication through specific protocols using the following process:
1. Click in a cell of the table that represents the subnet-to-subnet (or subnet-to-WAN) relationship to define.
All access rules (if any are defined) appear in the table in the lower-half of the screen.
2. Use the pull-down menu above the list to
You cannot allow some protocols (or ports) and deny others.
Description
No protocol exceptions (rules) are specified. All traffic may pass between these two
areas.
One or more protocol rules are specified. Specific protocols are either enabled or
disabled between these two areas. Click the table cell of interest and look at the
exceptions area in the lower half of the screen to determine the protocols that are
either allowed or denied.
All protocols are denied, without exception. No traffic will pass between these two
areas.
Deny menu item applies to all entries in the table. There are two ways to add entries
Allow
Add button and filling in the necessary
or Deny all the entries specified in the exception table.
3-7
LAN/Subnet Configuration