Mobile Unit (Mu) Statistics - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

Wireless switch
Hide thumbs Also See for WS2000 - Wireless Switch - Network Management Device:
Table of Contents

Advertisement

11-16 WS2000 Wireless Switch System Reference Guide

11.5 Mobile Unit (MU) Statistics

Each Access Port can have up to 32 associated mobile units. These units are listed in the Mobile Unit Access
Control List of the WLAN Security screen
<WLAN Name> Security.
To see a summary of the associated mobile units and general information about each unit, select
Statistics
-->
MU
Field
IP
WLAN
AP
Vlan
T-Put
ABS
%NU
Retries
Detail
(Network Configuration
Stats. The MU Stats Summary screen appears.
Description
Displays the IP address of the mobile unit.
Displays the WLAN with which the mobile unit is associated.
Displays the name of the Access Port with which the mobile unit is associated.
Displays the VLAN that each of the mobile units is associated with.
Displays the total throughput in Megabits per second (Mbps) for the mobile unit.
Displays the Average Bit Speed (ABS) in Megabits per second (Mbps) for the mobile unit.
Displays the percentage of the total packets for the mobile unit that are non-unicast pack-
ets. Non-unicast packets include broadcast and multicast packets.
Displays the average number of retries per packet. A high number in this field could indi-
cate possible network or hardware problems.
Clicking
MU Detail
will launch a new window with detailed statistics about the selected
mobile unit.
The MU Details screen is separated into four sections, MU Properties, MU Traffic, MU
Signal, and MU Errors. The MU Properties section displays basic information such as
hardware address, IP address, and associated WLAN and AP. The MU Traffic section dis-
plays statistics on RF traffic and throughput. The RF Status section displays information
on RF signal averages from the MU. The Error section displays RF traffic errors based on
retries, dropped packets and undecryptable packets.
-->
Wireless
--> <WLAN Name> -->
Status &

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents