12-58 WS2000 Wireless Switch System Reference Guide
Leo clicks the
Add
button to add a VPN tunnel.
Now Leo specifies the network parameters for the tunnel. The
Tunnel Name
is simply a name by which to
distinguish one tunnel from another. Leo names the tunnel "Eng2EngAnnex."
The
Local Subnet
is the subnet that will be networked over the VPN, in this case, the Engineering subnet.
The
Local WAN IP
is the IP address for the interface that this WS 2000 will show to the WS 2000 on the
other side of the VPN. Leo enters an unused, internal IP address, 192.168.24.198.