Configuring Subnet Access - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

12-54 WS2000 Wireless Switch System Reference Guide
The Access Ports are now configured. The next step is to specify access levels between the subnets.

12.26 Configuring Subnet Access

Leo selects the Firewall --> Subnet Access item in the left menu. This screen determines what subnet-
to-subnet traffic is allowed.
The subnet access defaults every subnet having access to every other subnet and full access to the WAN.
Leo wants to restrict subnet access so that marketing has no access to the engineering subnet and no access
to the administration subnet. He would also like to restrict all of the subnets to HTTP, SMTP, and POP access
to the WAN.
First Leo will restrict access from the marketing subnet to the other subnets. He selects the cell in the matrix
defined by From Mrkt-SN on the left and by To Eng-SN above. Then, in the Rules section, he pulls down
the menu to the left of all protocols and selects Deny. This will block all traffic originating in the marketing
subnet and going to the engineering subnet except the named protocols. No protocols were selected, so no
traffic will be allowed.
Leo clicks on the Apply button to record this subnet access configuration.