Network Wlan Wlan Ip Fiter Policy Commands; Set - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3.43.1 Network WLAN WLAN IP Filter Policy set Command

set

Network WLAN WLAN IP Fiter Policy Commands

Sets the WLAN IP filter policy configuration. IP Filters have to be set up through the Network > IPFilter menu.
Syntax
set [ipf-mode|default]
set ipf-mode <wlan-idx> <ipf-mode>
set default [incoming|outgoing] <wlan-idx> <action>
Syntax:
ipf-mode <wlan-idx>
<ipf-mode>
default [incoming|outgoing]
<wlan-idx> <action>
Example
admin(network.wlan.wlanipfpolicy)> show 1
-------------------------------------------------------------------------
Filter-Name
-------------------------------------------------------------------------
IP Filter Mode
Default Incoming Action
Default Outgoing Action
admin(network.wlan.wlanipfpolicy)> set ipf-mode 1 enable
admin(network.wlan.wlanipfpolicy)> set default outgoing 1 allow
admin(network.wlan.wlanipfpolicy)> set default incoming 1 allow
admin(network.wlan.wlanipfpolicy)>show 1
-------------------------------------------------------------------------
Filter-Name
-------------------------------------------------------------------------
IP Filter Mode
Default Incoming Action
Default Outgoing Action
Sets the IP filter mode <ipf-mode> (enable/disable) for the WLAN with
the index <idx> (1-8).
• incoming – Sets the default incoming action to <action> (allow/deny)
for IP filtering for he WLAN with the index <idx> (1-8).
• outgoing – Sets the default outgoing action to <action> (allow/deny) for
IP filtering for he WLAN with the index <idx> (1-8).
Direction Action
: disable
: deny
: deny
Direction Action
: enable
: allow
: allow
Network CLI Commands Reference
3-227