Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual page 80

4-26 WS2000 Wireless Switch System Reference Guide
SAML
RESET
VRFY
EXPN
4. Specify the outbound FTP actions that should get blocked by checking the FTP action to block. File Transfer
Protocol (FTP) is the Internet standard for host-to-host file transport. FTP generally operates over TCP on
port 21.
Storing Files
Retrieving Files
Directory List
Create Directory
Change
Directory
Passive
Operation
5. Click the Apply
(Send and Mail) This command initiates a mail transaction where mail data is sent to one
or more local mailboxes and remote terminals.
(Reset) This command cancels the current mail transaction and informs the recipient to
discard any data sent during this transaction.
(Verify) This command asks the receiver to confirm that the specified argument identifies
a user. If the argument does identify a user the full name and fully qualified mailbox is
returned.
(Expand) This command asks the receiver to confirm that a specified argument identifies a
mailing list. If the argument does identify a mailing list the membership list of that mail-
ing list is returned.
Blocks the request to transfer files sent from the client across the switch's WAN port
to the FTP server.
Blocks the request to retrieve files sent from the FTP server across the switch's WAN
port to the client.
Blocks requests to retrieve a directory listing sent from the client across the switch's
WAN port to the FTP server.
Blocks requests to create directories sent from the client across the switch's WAN
port to the FTP server.
Blocks requests to change directories sent from the client across the switch's WAN
port to the FTP server.
Blocks passive mode FTP requests sent from the client across the switch's WAN port
to the FTP server.
button to save changes made on this screen.