Ws2000>Admin(System.snmp.access)> Add - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

WS2000>admin(system.snmp.access)> add
Description:
Adds SNMP access entries.
Syntax:
add acl
<ip1> <ip2>
v1v2c
<comm>
v3
<user>
<auth> <pass1>
Example:
admin(system.snmp.access)>add acl 209.236.24.1 209.236.24.46
admin(system.snmp.access)>list acl
----------------------------------------------------------------
index start ip
----------------------------------------------------------------
1 209.236.24.1
admin(system.snmp.access)>add v3 fred rw 1.3.6.6 none
admin(system.snmp.access)>list v3 all
index
username
access permission
object identifier
security level
auth algorithm
auth password
privacy algorithm
privacy password
Adds an entry to the SNMP access control list with <ip1> as the starting IP
address and <ip2> and the ending IP address.
/
<oid> / all
ro rw
Adds an SNMP v1/v2c configuration with <comm> as the community (1–31
characters), the read/write access set to
and the Object Identifier <oid> (a string of 1–127 numbers separated by
dot, such as 2.3.4.5.6 or
/
<oid> / all <sec>
ro rw
/
<pass2>
des aes
Adds an SNMP v3 user definition with the username <user> (1–31
characters), access set to
set to <oid> (1–127 chars in dot notation, such as 1.3.6.1 or
objects), the security type <sec> set to one of
The following parameters must be specified if <sec> is set to
Privacy algorithm set to
Privacy password <pass2> (8–31 chars)
end ip
209.236.24.46
: 1
: fred
: read/write
: 1.3.6.6
: none
: md5
: ********
: des
: ********
Command Line Interface Reference
(read only) or
ro
for all objects).
all
. . . see second line of parameters
(read only) or (read/write), the object ID
ro rw
none
or
des aes
13-317
(read/write),
rw
for all
all
, , or .
auth auth/priv
:
auth/priv