Ws2000>Admin(Network.lan.dhcp)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual
Wireless switch
Hide thumbs
Also See for WS2000 - Wireless Switch - Network Management Device:
- Cli reference manual (452 pages) ,
- System reference manual (362 pages) ,
- Configuration manual (19 pages)
Table of Contents
Advertisement
13-96 WS2000 Wireless Switch System Reference Guide
WS2000>admin(network.lan.dhcp)> set
Description:
Sets DHCP parameters for the subnets.
Syntax:
set dgw
dns
wins
lease
domain
mode
range
relay
serverip
ddns
mode
fwd
zone
ddns
usrcls
tftp-server
bootfile
option-189
option-43
Example:
admin(network.lan.dhcp)>set dns 1 1 209.160.0.18
admin(network.lan.dhcp)>set dns 1 2 209.160.0.218
admin(network.lan.dhcp)>show dhcp 1
Sets the default gateway for subnet <idx> (
<idx> <ip>
address <ip>.
1
Sets the
<idx>
<ip>
2
<idx> (
Sets the WINS server for subnet <idx> (
<idx> <ip>
<ip>.
Sets the DHCP lease time for subnet <idx> (
<idx> <lease>
seconds
(
Sets the domain name for subnet <idx> (
<idx> <dname>
name <dname> (1 to 63 characters).
Sets the DHCP mode for subnet <idx> (
<idx>
none
client
none
server
client
server
Sets the DHCP assignment range for subnet <idx> (
<idx> <ip1>
<ip2>
IP address <ip1> to another IP address <ip2>.
Sets the DHCP relay server IP for subnet <idx> (
<idx> <ip>
<ip>.
Enables or disables DDNS for the subnet <idx> (
<idx>
enable/
disable
Sets the DHCP forward zone for the subnet <idx> (
<idx> <fwd
zone>
zone specified by <fwdzone> (
Sets the DDNS user class to single or multiple for the subnet
<idx>
single/
multiple
<idx> (
Sets the tftp-server IP for the subnet <idx> (
<idx> <tftp-
server>
<tftp-server>
Sets the bootfile name for the subnet <idx> (
<idx> <boot
file>
file name <boot-file> (
Sets the IP addresses and ports numbers for WIAP enabled
<idx> <ip
list>
switches for the subnet <idx> (
characters
addresses must be separated by a comma.
Sets the IP address for WIAP enabled switches for the subnet
<idx> <ip
list>
<idx> (
format a.b.c.d and multiple addresses must be separated by a
comma.
= primary or
= secondary DNS server for subnet
1
2
–
) to the IP address <ip>.
1
4
–
).
1
999999
-- disables DHCP node
-- enables the subnet to be a DHCP client
-- enables the subnet to be a DHCP server
).
1-4
max 31 characters
) must be in the format a.b.c.d:xx and multiple
). <ip-list> (
1-4
max 63 characters
–
) to the IP
1
4
–
) to the IP address
1
4
–
) to <lease>
1
4
–
) to the domain
1
4
–
) to:
1
4
–
) from
1
4
) to the IP
1-4
)
1-4
) to the
1-4
)
1-36 characters
) to the IP
1-4
) to the boot
1-4
)
). <ip-list> (
1-4
max 63
) must be in the
Hide quick links:
Advertisement
Table of Contents
