Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual page 656

A-14 WS2000 Wireless Switch System Reference Guide
System Component
SIP Module
SIP Module
SIP Module
SIP Module
SIP Module
SIP Module
SIP Module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
WIPS module
Debug
Level
LOG_ERR SIP:Bye received with NULL call id
LOG_ERR SIP:Status message received with NULL status code
LOG_ERR SIP:Status message received with NULL call id
LOG_ERR SIP:Status message received for an invalid call id [identifier]
LOG_ERR SIP:Status message received at invalid state for call id [identifier]
LOG_ERR SIP:Status message received at invalid state for call id [identifier]
LOG_ERR SIP:status message received with invalid error code [number]
LOG_ERR Could not read WIPS state
LOG_ERR Could not open socket
LOG_ERR Could not bind to socket
LOG_ERR Could not set socket options
LOG_ERR Error in receiving command
LOG_ERR Bad sensor command received
LOG_ERR WIPS: Invalid AD command [command] received
LOG_ERR Invalid AP MAC. Can not convert to sensor
LOG_ERR Can not convert the non-existing AP300 [MAC] to sensor
LOG_ERR Invalid AP MAC. Can not revert to AP
LOG_ERR Could not revert. Sensor [MAC] was not found
LOG_ERR Could not get free buffer
LOG_ERR Invalid AP MAC. Can not send cfg to sensor
LOG_ERR AD packet with invalid MAC is received
LOG_ERR Ack from an unknown sensor
LOG_ERR Could not remove sensor [MAC]
LOG_ERR Config from an unknown sensor
LOG_ERR Configuration with bad length is received from [MAC]
LOG_ERR Unexpected config reply from [MAC]
LOG_ERR Could not send back data
LOG_ERR Error reading configuration
LOG_ERR Could not find RF port [MAC]
LOG_ERR Invalid AP MAC. Can not get sensor config
Log Message