Ws2000> Admin(Network.wips)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

WS2000> admin(network.wips)> set
Description:
Sets the default WIPS configuration information. These settings are used when WIPS configurations are not
changed.
Syntax:
set mode
ipaddr
mask
dgw
pwips
swips
Example:
admin(network.wips.default)>
admin(network.wips.default)>
admin(network.wips.default)>
admin(network.wips.default)>
admin(network.wips.default)>
admin(network.wips.default)>
admin(network.wips.default)>
DHCP Mode
IP Address
IP Mask
Default Gateway
Primary WIPS Server
Secondary WIPS Server
Sets the default mode to
enable/
disable
Sets the IP address to <a.b.c.d> for the WIPS sensor
<a.b.c.d>
Sets the network mask to <a.b.c.d> for the WIPS sensor
<a.b.c.d>
Sets the default gateway for the WIPS sensor to <a.b.c.d>
<a.b.c.d>
Sets the primary WIPS server
<a.b.c.d>
Sets the secondary WIPS server
<a.b.c.d>
set mode enable
set ipaddr 192.168.0.10
set mask 255.255.255.0
set dgw 192.168.0.1
set pwips 192.168.0.20
set swips192.168.0.21
show
: client
: 192.168.0.10
: 255.255.255.0
: 192.168.0.1
: 192.168.0.20
: 192.168.0.21
Command Line Interface Reference
or
enable disable.
13-235