Ws2000>Admin(System.ntp)> Set - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

WS2000>admin(system.ntp)> set
Description:
Sets NTP parameters.
Syntax:
set mode
enable
disable
intrvl <time>
server
<idx>
port
<idx>
time
<yyyy> <MM> <dd>
<hh> <mm> <ss>
zone
<zone-
idx>
Example:
admin(system.ntp)>set mode enable
admin(system.ntp)>set server 1 203.21.37.18
admin(system.ntp)>set port 1 345
admin(system.ntp)>show all
ntp mode
server ip 1
server ip 2
server ip 3
server port 1
server port 2
server port 3
current time
admin(system.ntp)>
/ Enables or disables NTP.
Sets the length of time <time>, in minutes, for the switch to
synchronize its time with an NTP server.
Sets the NTP server IP address <ip> (a.b.c.d); specify one of the
<ip>/<
host
three NTP servers with <idx> (
name>
host name of the NTP server. When the value is a host name, the
domain name IP should be set under the (system.ws2000) menu on
the CLI.
Sets the NTP port for the indicated server <idx> to <port> (
<port>
).
65535
Sets the WS2000 system time manually. Time is in the format
YYYY MM DD hh mm ss (2008 02 24 11 25 32)
Sets the time zone to the <zone-idx> value. This value can be
found by using the (system.ntp)>zone-list command.
: enable
: 203.21.37.18
: 0.0.0.0
: 0.0.0.0
: 345
: 123
: 123
: 1970-01-07
Command Line Interface Reference
, , or ). This value can also be a
1 2 3
23:29:05
13-277
–
1